3. Mounting Installation
Note: The kit supplied in the package is designed for mounting vertically on a solid wall. If mounted onto
other types of walls, you will need appropriate fixings (not supplied). Please make sure the wall is safe to
mount. We highly recommend to have the panel installed by a qualified electrician or installer authorized by
Sundirect. The heater must be at least 20 cm removed from all objects, walls, etc.; the distance to the floor
must be at least 20 cm.
Step1. Measure the
distance between the
mounting brackets on the
back side of the heater.
Step2. Mark the position of
the holes on the wall based
on the bracket distance.
Step3. Drill 6 holes using a
8mm drill.
Step4. Insert the dowels
into the holes.
Step5. Fix the brackets to
the wall.
Step6. Mount the panel on
the bracket.
Step7. Screw in the two top
brackets to secure the
mounting.
