manualshive.com logo in svg

Termo AIRSCOUT SPECTRUM, Руководство пользователя

Поделиться
Скачать
Termo AIRSCOUT SPECTRUM Скачать руководство пользователя страница 28

AIRSCOUT SPECTRUM

Tempo Communications Inc.

1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155

28

2.9 Power In Band

8LI 43;)6 -2 &%2( QIRY EPPS[W QIEWYVMRK XLI MRTYX TS[IV MR E WTIGMƼIH FERH[MHXL &; MI SZIV E VERKI SJ

JVIUYIRGMIW [MXL E GIRXIV JVIUYIRG] ')28)6 WTIGMƼIH EX XLMW QIRY

 

 

 

POWER IN BAND feature also can be used to measure the channel width or channel separation 

F] EHNYWXMRK XLI &; XS ƼX

 

 

 

MARKER and POWER IN BAND cannot be activated both at the same time.

Tapping the SET TO CENTER button centers POWER IN BAND on the CENTER frequency of the currently selected SPAN.

To increase the accuracy of input power level measurements, select DETECTOR: AVG and 
one of the AVERAGE traces at the 

TRACE

 menu.

The currently selected parameter (BW/ CENTER) is displayed in white. The color of the keypad buttons shows which 

numbers can be entered at the current digit position to obtain a valid parameter value – the numbers on the 

green

 buttons can 

be entered, the numbers on the 

red

 buttons cannot be entered. If the currently entered value is valid, it is displayed in green 

(also OK button is 

green

). If the value is not valid, it is displayed in 

red

 (also OK button is 

red

 8S GSRƼVQ E ZEPMH ZEPYI XET XLI

OK button or tap the selected parameter’s box.

The BW of POWER IN BAND cannot be narrower than the currently selected RBW (see 

RBW & VBW

).

The frequency value can be entered with a precision of 0.01 MHz (10 kHz) by using the “.” on the keypad. To input 

E ZEPYI [MXL HIGMQEP HMKMXW ƼVWX IRXIV XLI JYPP 1,^ƅW XLIR XET XLI ƈƉ FYXXSR ERH IRXIV XLI VIWX SJ XLI HMKMXW 9RXMP XLI ZEPYI MW
GSRƼVQIH XLI HMKMXW EJXIV XLI TSMRX EVI HMWTPE]IH PEVKIV -J XLIVI EVI RS HMKMXW HMWTPE]IH EJXIV XLI TSMRX MX QIERW XLEX XLI] EVI

zeroes.

 

 

 

While in the POWER IN BAND menu, tapping the graph will place the POWER IN BAND area there. 
POWER IN BAND area can be moved also by dragging it.

If the POWER IN BAND area frequency is outside of the currently displayed frequency range, arrows 
on the graph will indicate beyond which side of the graph the POWER IN BAND area is positioned. 

To exit the POWER IN BAND menu and return to the main screen, tap BACK. When POWER IN BAND is enabled, the 

POWER IN BAND button is 

green

 on the main screen. Tapping the POWER IN BAND button when it is active, disables the 

POWER IN BAND. POWER IN BAND is disabled by default.

 

Содержание AIRSCOUT SPECTRUM





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды