Termite detection systems TDS-II, Руководство оператора

Страница: 2 / 12

OPERATOR’S MANUAL
The TDS-II uses infrared optics with a lifetime sensor to create a portable system that will detect
the extremely small amounts of gases put off by termites and bed bugs. Its superior combination
of sensitivity, speed, flexibility and portability provides a highly accurate detection capability for
both dry-wood and subterranean termites as well as bed bugs.
Termite detection and isolation of as few as 2 or 3 termites to full colonies is achieved and as
few as one bed bug may be detected with the unit in the Turbo mode. The TDS-II operates on
a rechargeable lithium ion polymer battery that gives the user over 8 hours of use before
recharging. When charging is needed both an AC wall charger and a DC vehicle charger is
provided for user’s convenience.
Three levels of sensitivity are provided to aid the user in isolation of small and large
concentrations of termites. The fourth setting, the TURBO setting, is super sensitive and is
recommended for the detection of Bed Bugs. Since the TDS-II is self calibrating, no special set
up is required. The detector is ready for use within 30 seconds after being turned on. A standard
9 inch wand is used to test into suspected areas, but a needle probe extension tip and a flexible
wand extension
are provided to
assist testing in
suspected
areas that are
difficult
to
reach.
Specially
designed
disposable filters are used in the wand or probe to keep out foreign material and water.
Additional features provided to the user are a convenient audio MUTE button to minimize noises
in testing area when desired, and a PEAK button to capture the high point of a signal upon
detection to provide the user an indication of strength of the detected signal.