Terex TL160, Руководство по эксплуатации

Страница: 51 / 114

Operation 4
51/112 TL160 Operating Manual 12.9.08 Version 1.0
4.8.4 Driving on roads
• Before driving on open roads, the following points
have to be observed:
• Empty the bucket and tilt back completely.
• Attach the protective device onto the front bucket
edge.
• Secure the side-dump bucket with socket pins.
• Completely retract the high-tip bucket.
• Fold up the forks of the fork lift attachment, lock in
place and secure against lateral shifting.
• Raise the lift frame as far as the height color mark
(22/1) until sufficient ground clearance is secured.
• Set the travel direction preselection rocker
switches on the joystick (23/7) and on the
instrument panel (23/36) to "0" (neutral position).
• Switch off the working hydraulics (23/35).
• Check the function of the direction indicators,
hazard warning lights, horn, low/high beam.
• Close the cabin door.
Fig. 22 Height color mark
1
Endangerment of road-traffic
due to missing equipment.
Ensure that the wheel loader is equipped as
stipulated by the regulations authorizing the
use of vehicles for road traffic in the user's
country.
Fig. 23 Driving on roads
00014,0 h
12 Km/h
0 4/4
1/2
+
-
P
00014,0 h
12 Km/h
0 4/4
1/2
+ -
P
36
7
35
Danger to life
due to rigid forks.
• Rigid forks must be dismounted before
driving on public roads!
Attention
Only press when machine is stationary!