Terex tc37 Скачать руководство пользователя страница 79

Страница: 79 / 100

Operating Manual Crawler Excavator TC37

Care and Maintenance

7.8.5

Air filter, air intake

Cleaning the dust ejection valve

The dust ejection valve (49/1) is largely maintenance-
free.

• Any baked-on dust can be removed by squeezing

the valve together.

Cleaning or replacing the air intake

• Clean impurities (leaves, etc.) from the air intake

section in front of the air filter.

• Check the air filter attachment for damage and

repair or replace if necessary.

• Check the tightness of the air duct after the air

filter.

• Examine rubber parts for damage and replace if

necessary.

Machine damage

due to dust being drawn into the engine.

• All maintenance work on the air intake

system must be carried out with the engine
off.

• Do not start the engine while the filter

cartridge is removed.

Fig. 49

Cleaning the dust ejection valve

HR12-03-53

Содержание tc37





































































































Результаты поиска

Содержание tc37

Отзывы:

Похожие инструкции для tc37

Бренды по названию

Популярные бренды

Terex tc37, Руководство по эксплуатации

Результаты поиска

Содержание tc37

Отзывы:

Похожие инструкции для tc37

Бренды по названию

Популярные бренды