Terex tc37 Скачать руководство пользователя страница 51

Страница: 51 / 100

Operating Manual Crawler Excavator TC37

Recovery, Loading and Transporting

5.1

Recovery

The following towing lugs are available if the machine
has to be pulled for recovery:
– Lug (23/1) on chassis
– Two drilled holes (23/2) on dozer blade

5.2

Loading the machine by use of a
crane

• Empty and fold in the bucket.

• Position the work equipment to be pointing straight

ahead.

• Raise the boom as far as the height specified.

• Retract the dipperstick.

• Stop the engine.

• Leave the excavator and close the doors.

• Attach the excavator to the 3-point hoisting

appliance at the points illustrated in the correct
manner. Ensure that the crane lifting harness
(24/1) is correctly seated.

Fig. 23

Towing lugs

HR14-04-33

Attention

We recommend recovering the machine
using a crane.

Fig. 24

Locking the uppercarriage using the slewing lock

HR3.7-03-34

ca. 1300

ca. 330

Attention

Only use the original Terex

crane lifting

harness.

Machine damage

due to exceeding the maximum weight-lifting
capacity.

• Ensure that the weight-lifting capacity of

the crane is at least 8820 lbs.

Содержание tc37





































































































Результаты поиска

Содержание tc37

Отзывы:

Terex tc37, Руководство по эксплуатации, Страница: 51 / 100

Результаты поиска

Содержание tc37

Отзывы: