Terex TA400, Руководство по эксплуатации

Страница: 128 / 177

Working the Machine
5-4
On some jobs, the loading machine might work most efficiently when
the receiving machines are positioned on both sides of the loader.
Thus, while one machine is being loaded, another can move into
position on the opposite side of the loader and the loading machine
can swing over to load the next machine with a minimum of lost time.
Since the machine is usually backed into the loading position with this
method, the operator must be alert and careful while backing.
For fastest, most accurate loading, when being loaded by a front end
loader, the machine operator should stop on the most level area and
at an angle to the face of the bank or stockpile. This minimizes loader
travel time, particularly with a raised, full bucket. Where possible, the
machine should also locate downwind of the loader when dusty
material is being loaded on a windy day. This practice improves both
working conditions and visibility for the loader operator.
A cleanup dozer or small loader is often worked in conjunction with
the main loading machine to keep the area clear of bucket spillage for
maximum efficiency of the loading operation. The machine operator
must always be alert to the position of the cleanup machine when
entering the loading area to avoid congestion, and, for maximum
safety.
When the loader operator signals that the machine is loaded, sound
two blasts on the horn for forward movement and three blasts for
reverse movement. Select the correct gear and release the brakes.
Move out of the loading area and onto the haul road, with the least
possible delay, to allow any waiting machine to move into the loading
position as soon as possible.
2027 Loading Both Sides
2028 Loading With Front End Loader
2029 Watch Cleanup Machine
WARNING
Avoid rocks and other shovel spillage that can needlessly
damage tyres or other machine components. Allow the
cleanup machine sufficient time to clear up such debris.
Do not move the machine into loading position with the
shovel bucket swinging overhead. Large rocks that might fall
from the bucket can be dangerous to both the operator and
the machine.