Terex Genie Z-45/25 Bi-Energy, Руководство по обслуживанию и ремонту

Страница: 47 / 143

July 2021 Service and Repair Manual
Primary Boom Components
Part No. 1312350GT Z ® -45/25 • Z ® -45/25J 35
17 Raise the primary boom slightly with the
suitable lifting device to relieve the pressure
on the primary boom lift cylinder rod-end pivot
pin.
18 Use a soft metal drift to remove the primary
boom lift cylinder rod-end pivot pin.
Crushing hazard. The primary
boom lift cylinder could become
unbalanced and fall if not
properly supported by the lifting
device.
19 Lower the rod end of the primary boom lift
cylinder approximately 12 inches / 30 cm.
20 Pull all of the hoses and cables out and away
from the mounting ears for the rod end of the
primary boom lift cylinder.
21 Raise the rod end of the primary boom lift
cylinder back into position and install the rod-
end pivot pin. Install the pin retaining
fasteners.
22 Attach a strap from an suitable lifting device to
the cable track.
23 Remove the mounting fasteners from the
upper cable track at the platform end of the
extension boom.
24 Remove the cable track mounting fasteners
that attach the lower cable track to the
primary boom.
25 Remove the cable track from the machine and
place it on a structure capable of supporting it.
Crushing hazard. The cable
track could become unbalanced
and fall if not properly attached
to the lifting device.
Component damage hazard.
Cables and hoses can be
damaged if they are kinked or
pinched.