Operator's Manual
Seventh Edition • First Printing
Inspections
26
Z
®
-
34/22N • Z
®
-34/22DC
Part No. 1297937GT
At the Platform Controls
14
Turn the key switch to platform control.
15
Pull out the red Emergency Stop button to the
on position.
Result: The beacon (if equipped) should flash.
Test Emergency Stop
16
Push in the platform red Emergency Stop
button to the off position.
Result: No functions should operate.
Test the Horn
17
Pull out the red Emergency Stop button to the
on position.
18
Press the horn button.
Result: The horn should sound.
Test the Foot Switch
19
Do not press down the foot switch and test
each machine function.
Result: No functions should operate.
Test the Lift/Drive Select Function
20
Press down the foot switch.
21
Move the drive control handle off center and
activate a boom function control handle.
Result: No boom functions should operate. The
machine will move in the direction indicated on
the control panel.
Test Machine Functions
22
Press down the foot switch.
23
Activate each machine function control handle
or toggle switch.
Result: All boom and platform functions should
operate through a full cycle.
Note: Control the speed of boom functions by
adjusting the boom function speed controller. Drive
and steer functions are not affected by the boom
function speed controller.
Test the Steering
24
Press down the foot switch.
25
Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the blue triangle on the control panel OR slowly
move the control handle in the direction
indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
26
Press the thumb rocker switch in the direction
indicated by the yellow triangle on the control
panel OR slowly move the control handle in the
direction indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
