Operator's Manual
Second Edition • First Printing
Transport and Lifting Instructions
30
Genie Superlift Contractor
®
Part No. 1314196GT
Transport and Lifting Instructions
Observe and Obey:
The transport vehicle must be parked on a
level surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial label for
the machine weight.
The machine must be securely fastened to the
transport vehicle. Use chains or straps of
ample load capacity.
Loading the Machine
Be sure to remove the load handling attachment
from the machine and place the stabilizers in the
stored position.
1 Fully lower the carriage, to lock for transport.
2 Rotate the carriage hold-down bar over the
carriage.
3 Raise the carriage until it contacts the carriage
hold-down bar.
4 Adjust the loading wheels to the desired
position. Be sure the pin is properly inserted.
5 Lock the rear base casters.
6 Place the machine against the vehicle. Use
proper lifting techniques to load the machine
into the transport vehicle. Be sure to check
that the carriage is locked in the lowered
position.
7 Use a minimum of 1 chain or strap to secure
the machine to the truckbed. Place the chain
or strap over the mast. Placing the chain or
strap over the legs can damage the legs.
8 To unload, follow the loading instructions in
reverse order.
Loading the Machine With a
Crane
Be sure to place the legs and stabilizers in the
stored position.
Inspect the entire machine and
remove any loose or unsecured
items.
Use the lifting bracket on the top
of the rear mast column.
Always place the lifting hook through the lifting eye
so that it points away from the machine.
