Operator's Manual
Fifth Edition • Fifth Printing
Operating Instructions
44 GS
™
-30 • GS
™
-32 • GS
™
-46
Part No. 114313GT
How to Fold Down the Guardrails
GS-1530, GS-1532, GS-1930, GS-1932,
GS-2032, GS-2632 and GS-3232
The platform railing system consists of one fold
down rail section for the extension deck and one
section for the main deck. All sections are held in
place by four wire lock pins.
1
Fully lower the platform and retract the platform
extension.
2
Remove the platform controls.
3
From inside the platform, remove the two rear
extension deck wire lock pins.
4
From the rear of the extension deck railing, fold
down the front rail assembly. Keep hands free
of pinch points.
5
Replace the two removed pins back into each
side rail bracket.
6
At the rear of the main deck, remove the two
lower wire lock pins.
7
Carefully open the gate and move to the rear
step or the ground.
8
From the rear step or from the ground, fold
down the main deck railing assembly. Keep
hands free of pinch points.
9
Replace the two removed pins back into each
side rail bracket.
Note: To assist in the removal and replacement of
the wire lock pins, pull or push back on the railing to
compress the rubber bumpers.
GS-2046, GS-2646 & GS-3246
The platform railing system consists of three fold
down rail sections for the extension deck and three
sections for the main deck. All six sections are held
in place by four wire lock pins.
1
Fully lower the platform and retract the platform
extension.
2
Remove the platform controls.
3
From inside the platform, remove the two front
wire lock pins.
4
Fold down the front rail assembly. Keep hands
clear of pinch points.
5
Replace the two removed pins back into each
side rail bracket.
6
Fold down each side rail assembly. Keep
hands clear of pinch points.
7
At the rear of the main deck, remove the two
wire lock pins.
8
Carefully open the gate and move to the
ground.
9
Fold down the rear gate and entry side rails as
one unit. Keep hands clear of pinch points.
10
Fold down the left and right side rails. Keep
hands clear of pinch points.
11
Replace the two removed pins back into each
side rail bracket.
How to Raise the Guardrails
Follow the fold down instructions but in reverse
order, ensuring all lock pins are in place and
installed properly.
