Teresonic Ingenium Скачать руководство пользователя страница 7

 

Installation and Wiring 

Before making any connections always 

turn off  your amplifier

. Installing and wiring 

your speakers is an easy and straightforward process. Enjoy your new Teresonic sound! 

our speakers are equipped with highest quality WBT binding posts that are a true five-way design and 
will accept 6mm (1/4") or 8mm (5/16") spades, 4mm bananas, bare wire etc. There is 

no

 need for the 

complicated and extra costs of bi-wiring, there are 

no

 crossovers to adjust…just connect the speaker 

cables and enjoy the music.  

For optimal results Teresonic “zero interference” Clarison speaker cables are recommended

 

to connect the 

loudspeakers with your amplifier. Namely, the same ultra-high quality Clarison cables that are used inside the 
speaker cabinet to connect speaker terminals in the back to the speaker driver. Using the same cables will 
ensure the same character of the sound and the best overall sonic quality without coloration or distortions 

Wiring 

Connect the speaker wires to the terminals in the back of the speakers. For the perfect sound experience, the 
right speaker must be connected to the output terminal marked "R" or "Right" on your amplifier and the left 
speaker to the terminal marked "L" or "Left". A detail that is often overlooked is connection in correct phase, 
i.e. the red terminal (+) on the amplifier should be connected to the red terminal (+) on the speaker, and the 
white terminal (-) on the amplifier should be connected to the white terminal (-) on the speaker. (see Fig.1).  If 
just one speaker in a stereo or surround sound system is not connected in phase, the bass will be weak and the 
overall sound will be diffuse.   

 

 

 

 

 

 

 

 

 

 

Fig. 1 

  

Chapter 

Содержание Ingenium





















Отзывы: