![Terdens 3571 Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/terdens/3571/3571_manual-user_1088613010.webp)
To reset the maximum and minimum temperature and humidity, press and hold down the
“
MEMORY
” button about 2 seconds. This will reset all minimum and maximum data recorded to the
current displayed values.
Temperature alert setting
Press and hold down the
“
ALERT
” button for 2 seconds until the icon for the Temperature Alert”
starts to flash
The icon of Upper limit of the Temperature alarm starts to flash. Use the
“
▲
” and “
▼
” buttons to set
the required maximum temperature. Press
“
ALERT
” to confirm your setting.
The icon of the Lower limit of the Temperature alarm starts to flash. Use the
“
▲
” and “
▼
” buttons to
set the required minimum temperature. Press
“
ALERT
” button to confirm your setting and to end
the setting procedure
When Temperature Alert is On alert : there are 3 beep sounds per second, the alarm will sound for
1 minutes if you do not deactivate it by pressing any button.
Activate and deactivating the temperature Alert: Briefly press
”
ALERT
” button to activate or
deactivate the temperature alert.
Receiving of the RCC signal:
After power on, the unit will automatically receive RCC signal for Max. 7 minutes, and the RCC icon
flash at 1Hz.
At 1:00 /2:00 / 3:00 am, RCC receiving will be turned on automatically, and the clock will be
synchronized if receive successfully. If this receiving fail (the radio mast icon disappears from the
display), the system will automatically attempt another synchronization at the next full one hour.
This procedure is repeated automatically up to total 5 times per day.
Press and hold down the
“
▼
” button also can enable or disable the RCC receiving. If no signals
received within 7 minutes, then the
DCF
signal search stops (the radio mast icon disappears) and
start again at the next full one hour.
F.Y.I.:
A flashing radio mast icon indicates that the unit is receiving RCC signal.
A continuously displayed radio mast icon indicates that the
DCF
signal was received successfully,
the radio mast icon will disappear if receiving fail.
We recommend a minimum distance of 2.5 meters to all sources of interference, such as
televisions or computer monitors
Radio receiving is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such
extreme circumstances, place the unit close to the window.
Backlight:
Briefly press the
SNOOZE/LIGHT
button to activate the display lighting for 5 seconds.
ALL RIGHTS RESERVED
РУССКИЙ
Технические данные:
Радиоуправляемые часы с помощью частоты DCF
Ручная настройка времени.
Непрерывная календарь до 2099 года.
даты и дня недели дисплей.
Температура альтернативно в
℃
или
℉
.
Содержание 3571
Страница 3: ......