Terbly LPAR7QZ, Руководство пользователя

Страница: 16 / 27

LPAR7QZ User Manual XM1334-V1.2-B 15
EditProg
Prog 1
:
Prog 10 ProgTest
EdStep01
~EdStep64 T01SCxxx
S01SCxxx
S64SCxxx Testing program
Program in loop
Save and exit
EditScen
Scen001
~ Scen250
Auto,……
--ScenTime--
--fadeTime--
InByOut Auto=xxx…
Red=xxx…
TIME=xx.xs
=xx
Save and automatically
return manual scenes edit
RecCntrl XX~XX Automat. scenes rec
Info
TimeInfo
Cur Time
TotalHrs
Last Hrs
TimePass
Clr Last
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
Password=XXX
ON/OFF
Power on running time
Fixture running time
Fixture Last times clear
Timer Password 038
Clear Fixture Last time
TempInfo HeadTemp
XXX /
Temperature in the head
Soft Ver Ver x.x.x
Software version of each
IC
9.1. FuncMode
9.1.1. Address
With this function, you can adjust the desired DMX-address via the Control Board.
1. Access the main menu.
2. Tap the <Up/Down>button until
“
Address
”
is displayed.
3. Press<ENTER>, the display will show
“
Address
”
.
4. Tap the <Up/Down>button the display will show “A001~AXXX”
5. Press<ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.1.2. ValuDisp
With this function you can display the DMX 512 value of each channel. The display
automatically shows the channel with a value changing.
1. Access the main menu.
2. Tap the <Up/Down>button until
“
ValuDisp
”
is displayed.
3. Press<ENTER>, the display will show
“
ValuDisp
”
.
4. Tap the <Up/Down>button choose each channel.
5. Press<ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.1.3. SetSlave
With this function, you can define the device as slave.
1. Access the main menu.
2. Tap the <Up/Down>button until
“
SetSlave
”
is displayed.
3. Press <ENTER>, the display will show
“
SetSlave
”
.
4. Tap the <Up/Down>button the display will show “Slave1”, ”Slave2”, ”Slave3”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.1.4. AutoProg
With this function, you can run the internal program. You can select the desired program under
“Select program”. You can set the number of steps under “Edit program”. You can edit the
individual scenes under “Edit scenes”. With this function, you can run the individual scenes
either automatically, i.e. with the adjusted Step-Time.