manualshive.com logo in svg

Terayon TA-102, Техническое руководство по обслуживанию

Поделиться
Скачать
Terayon TA-102 Скачать руководство пользователя страница 29

MTA Installation

Chapter 2  Installation

TA 102/202 Technical Support Guide

2-11

Connecting the USB Cable 

In order for the computer USB Interface to pass data back and forth to the TA-102/202 
eMTA, you must connect a USB cable to the TA-102/202 eMTA USB port and the USB 
port on the back of the computer.

To connect the USB cable, follow these steps:

1. Retrieve the USB cable from the box the TA-102/202 eMTA came in.

2. Using Figure 2-8 as a guide, insert the USB cable “B” connector into the USB Serial 

port on the back of the TA-102/202 eMTA.

3. Insert the USB cable “A” connector into the computer USB Serial port on the back of 

the computer.

4. If you are going to connect a telephone to the modem, proceed to “Connecting A Tele-

phone to the TA-102/202 eMTA” on page 2-13. If you are not going to connect a tele-
phone to the modem, proceed to “TA-102/202 eMTA Start Up” on page 2-14.

IMPORTANT: Before you install the USB cable, you must install a USB 
driver. Insert the USB Driver CD that came with the modem into your CD-
ROM drive and follow the online instructions. You may have to tell the 
computer what drive your CD-ROM drive is.

USB DRIVER CD

CD-ROM DRIVE

Содержание TA-102





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды