Terason t3000, Руководство пользователя

Страница: 63 / 421

Terason t3000 / Echo Ultrasound System User Guide 63
4 Acquiring Images
To support image acquisition, you must understand:
• Powering the Laptop On and Off on page 63
• Starting and Exiting the Software on page 63
• Connecting a Transducer on page 64
• Switching Transducers on page 65
• Conducting an Ultrasound Exam on page 65
• Freezing Images on page 70
• Working with Image Loops on page 70
• Determining Image Status on page 72
• Adjusting the Displayed Image on page 73
• Adding Guides to the Image Display on page 77
• Changing the Text Size on page 78
• Using Split Screen Mode on page 79
• Working with Annotations on page 81
To adjust the acquired scan data, see Chapter 5 - Working With Scan Modes .
Powering the Laptop On and Off
To power the laptop on, press the power button at the top right of the keyboard. This
does not power up the console; you must start the ultrasound software and extend the
console out from the system to power-on the console.
To power off the laptop, either press the power button or select
Shut Down
from the
Windows Start menu. Using either method also shuts down the console.
Starting and Exiting the Software
You can use either of these methods to start up the Terason software:
• Double-click the Terason shortcut , on your computer desktop
• Select
Start > Programs > Terason > Terason
Note: When running a laptop on battery power, always check the amount of power left.
The system beeps when the battery is getting very low. For information on
checking the battery power status for your computer, refer to the computer manual