NET-FMC
User Manual
- 6 -
www.terasic.com
January 16, 2018
The default setting of the Ethernet Port is SGMII mode. Users can change Ethernet mode
by using the Mode Switch x4. Take ETH0 as an example.
Set ETH0 MODE on the NET_FMC card to RGMII mode (default). The SW0[6:1] on
NET-FMC should be set to 001010, as shown in
Figure 2-5
.
Figure 2-5 SW0 setting for ETH0 port RGMII mode
Set ETH0 MODE on the NET_FMC card to GMII/MII mode. The SW0[6:1] on NET-FMC
should be set to 001001, as shown in
Figure 2-6
.
Figure 2-6 SW0 setting for ETH0 port GMII/MII mode
