Limited warranties
1. In the event of failure or breakage under the proper use of the product during the warranty period,
equipment supplied by TERAL Asia Ltd. (hereinafter referred to as TERAL) will be repaired or replaced
free of charge within the scope of the relevant part, provided that such failure or breakage is
attributable to inadequacy of the design or workmanship of the equipment.
2. The warranty mentioned in the above clause shall be only the mechanical warranty of the defective part,
and shall not cover any expenses or other damage arising from the failure or breakage.
3. In the event of the following failures and breakage, the costs of the repairs and consumables (i.e. parts
whose consumption or wear is expected at the beginning of purchase) shall be for the account of the
user.
(1) Failures and breakage attributable to equipment that was not delivered by TERAL
(2) Failures and breakage occurred after the expiration of the warranty period
(3) Failures and breakage caused by disasters or force majeure, such as fire, acts of God or
earthquakes
(4) Failures and breakage resulting from repairs, disassembly or modifications made without the
consent of TERAL
(5) Failures and breakage occurred when parts other than those designated by TERAL are used
(6) Failures and breakage caused by use out of the range of specifications.
4. The warranty shall not cover any damage caused by misuse or abuse of the pump even within the
warranty period. Cost and expenses incurred for sending engineer(s) in such a case shall be borne by
the user.
5. If the cause of the failure is unclear, necessary actions shall be determined through mutual
consultation.
6. In order to improve performance, some parts and/or components of the product may be changed
without prior notice.
For repairs, reuse parts conforming to TERAL’s quality standards or substitute parts having equivalent
functions may be used.
Purpose of this manual / Notice to users
1. The purpose of this manual is to provide the user with detailed information necessary to properly
operate, maintain and inspect the pump.
Work that requires highly specialized knowledge (disassembly, repairs, etc.) is not covered in this
manual. If the equipment needs to be repaired, make sure to contact TERAL or its relevant service
provider.
2. This manual is intended for:
• persons who have experienced in the operation of pump or those who have been trained by such
experienced persons and
• qualified persons, such as licensed electrical engineers, for the content regarding electric wiring
work
3. This manual mainly covers standard products. If you have purchased a customized product, some part
of this manual may not be applicable to your equipment. In such a case, please refer to the delivery
specification, etc. supplied separately to check the product specifications.
4. The product specifications and information in this manual are subject to change without prior notice.
5. In this document, some parts of illustrations of the product is omitted or simplified in order to provide
easy-to-understand descriptions. Therefore, the appearance shown in this document may be different
from that of the actual product.