background image

● 

Fixed Frequency Mode Disabled

- Bolt 4K scans all available channels and 

   repeatedly switches from one frequency to 

   the next during transmission

● 

Fixed Frequency Mode Enabled

- Bolt 4K connects to one specific frequency

NOTE: By default, Bolt 4K will select the lowest available frequency from the 

Frequencies list if one has not been selected beforehand. 

Frequency mode

, navigate to 

Frequencies

 and select a frequency not in use (non-DFS 

frequencies only). For best results, ensure that both the transmitter and receiver have 

Fixed Frequency Mode

 enabled, and use the 

Spectrum Analyzer

 (on the receiver's 

front panel or the Bolt app) to search for the least congested frequency to use. 

WIRELESS SETTINGS - SELECT BANDWIDTH

The Bandwidth menu lets you choose between 40MHz (default) and 20MHz operating 

modes. Ensure that both the transmitter and receiver are set to the same bandwidth 

with a resolution of up to 1080p60. For all available frequencies, refer to the 

FREQUENCIES BY REGION

 chart on page 25.  

WIRELESS SETTINGS - SELECT FREQUENCY

The Frequencies menu contains a list of all available frequencies. Bolt 4K will 

automatically select an operating frequency when multiple values are selected. If 

both the transmitter and receiver have 

Fixed Frequency Mode

 enabled, you can only 

select one frequency for Bolt 4K to use. Frequencies marked with (DFS) must be 

scanned for one minute before they can be used, but are typically less crowded. For 

all available frequencies, refer to the 

FREQUENCIES BY REGION

 chart on page 25.

● 

20MHz

- Reduces the amount of bandwidth by half, effectively doubling the 

   number of usable frequencies while decreasing interference 

● 

40MHz

- (

Default

) Increases the amount of bandwidth by bonding two 20MHz 

   channels, allowing for faster transfer rates but increased interference

NOTE: 20MHz mode supports HD/3G resolutions up to 1080p60. Resolutions up to 

4k30 are also supported, but downscaled to 1080p before transmission (4k50/59/60 

is not supported).

 

16

Содержание Bolt 4K 1500
































Отзывы: