Bolt Pro 300 OSD Operation
Status Screens
– Activate the status OSD by depressing the joystick button, and cycle
through screens by pressing these buttons up or down. Hide the status screen by pressing left.
Main Status Screen – This screen displays the status of the wireless receiver, along
with the current video resolution, frequency, link quality (if connected).
Time Code Screen – Displays the current time code if received from the transmitter.
Temperature Status Screen – Displays the current internal temperature of the unit.
Menu Operation
– launch the menu by pressing right while the OSD is active. Exit from the
menu by pressing left to back out of the menus
HDMI/SDI Out Format – Select the video output format. You can choose to match the
video source resolution by selecting ‘Same as Input,’ or choose from the resolutions
listed
USB Output Format – Configures Bolt’s USB video output. Match the output format
to the received video format by selecting “Same as Input” or allow the connected
computer to set the format by selecting “Set by host.” You can also manually select a
video resolution and frame rate.
3D LUT Settings – Select a 3D LUT to apply to the receiver’s video output from the
“3D LUT Presets” menu. Choose from full screen or split screen using the “3D LUT
Mode” menu.
Test pattern – Select a video output format from this menu to output a test pattern over
HDMI and SDI. Return to the previous video by pressing left on the ‘Menu’ joystick.
Pairing – Select Pairing to link your receiver with another transmitter. Once pairing is
activated on the receiver, turn on the transmitter and use a paper clip to hold the reset
button (between the DC input and power switch) for 3 seconds and release. The red
warning LED and link LEDs will blink to indicate that pairing is active.
OSD Settings – Choose when to display the OSD. By default, the OSD is displayed
when the link is down. “Hidden by default” hides the OSD until it is activated by the
joystick. If “Always show OSD” is selected, the OSD will be displayed unless
deactivated by the joystick.
Reset All Settings – Use this to reset all configurable options to their factory defaults.
Device Info – Displays the model and serial number.
