ENC-500
™
User Guide V1.0
8
2.4
Connecting the Encoder
For connecting the encoder, adhere to the following order of steps:
Always
plug in the connector of the power supply to the backside of the chassis first.
Connect the power cable to the power supply.
Connect the network cable to the network interface.
Connect your HDMI source unit to one of the HDMI inputs of the ENC-500.
For analogue audio, please use the 3.5
’ Mini Jack connector at the front.
2.5
ENC-500-HDMI Front Side Components
Figure 2: ENC-500-
HDMI™ front side
Front panel connection:
Description:
LED:
LED status:
Red LED
Power Indicator
Yellow LED
No Network
Flashing when RTMP connection is established
Green LED
Encoder is started and working
Audio
Analog Audio Input
HDMI in
HDMI Interface
Reset
Restart/Reboot the ENC-400
ETH:
Standard 10/100 Mbit/s Ethernet via RJ-45
Table 1: Description of the front side connectors on the ENC-500-
HDMI™