ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
59
4.
Extended Function
4.1
Remote Control
This chapter describes the remote control of the ENC-
300™ for media controls like Crestron or AMX.
To control the ENC-
300™, the telnet protocol is used at the port number 2323. Furthermore here is no
login necessary.
To test the remote control under windows you can open the command prompt tool. A practical way to
open a command window within Windows Explorer is to write C:\Windows\system32\cmd.exe.
Another way to open a new commando prompt is by choosing the Start menu and selecting
‘Run’
. Then
write
‘cmd’
in the text field and press the
‘OK’
button. See Figure 48.
Figure 48: Command to open the command prompt
In both cases the following window opens, see Figure 49.
Figure 49: 'Command Prompt' window to test the remote control of the ENC-300
™