Teracue DMM-Series, Руководство пользователя, Страница: 8 / 46

DMM-Series
User Guide V1.2
8
2. Control with Display and Keypad
2.1 DMM-150 Series
Main-Menu Sub-Menu Description
Inputs
Status
ASI: Display ASI input status
TUNER: Display tuner input status
IP IN: Display IP input status
DVB-S2
LNB Frequency: Input LNB frequency
Satellite Frequency: Input downstream frequency of satellite
Symbol Rate: Input symbol rate of satellite
LNB Voltage: Off/13V/18 V
LNB 22KHz: 22KHz or Off.
DISQEC: Port A/Port B/Port C/Port D/DiSEQC OFF
PLS Gold Code: 0~5000
Frequency Offset High: 5000KHz
Frequency Offset Low: -5000KHz
QAM
Constellation: 16/32/64/128/256QAM/64B/256B
Frequency: Enter the frequency of the QAM signal in MHz.
Symbol Rate: Edit the symbol rate to the proper value in kBaud.
COFDM
Frequency: Input terrestrial frequency.
Bandwidth: select bandwidth from 6MHz, 7 MHz and 8 MHz.
RSSI
Tuner Status: Display tuner status
Strength Display: Display the strength of tuner signal
Ethernet
Stream IP Addr: 1.0.0.1~223.255.255.254
Stream Netmask: 1.0.0.1~223.255.255.254 and 0.0.0.0
Stream Gateway: 1.0.0.1~223.255.255.254 and
224.0.0.0~239.255.255.255
Stream Mac Address: Display MAC address
Multicast IP Addr: Enter the IP address of the multicast stream
for the transport stream over IP.
Multicast UDP Port: Enter the UDP port number of the TS over
IP stream.
Protocol: UDP/RTP.
Output Smoothing:
Auto: the bit rate is variable.
Disable: the unit let the TS pass by.
Fixed Rate: the bit rate is fixed.
TS Bit Rate: sets the bit rate of the TS which comes from
the TS/IP input. The setting is only valid when the output
smoothing is configured as Fixed Rate.