Amino A140
Quick Start Guide V1.7
2
This Quick Start Guide is written for the amino A140 with Opera 10 Firmware 2.1.3 and higher.
Older firmware versions, also on amino 130, look a little bit different, but have nearly the same
features.
.!.
Note: The needed passwords are
‘
leaves
’ to enter the setup menu ‘
snake
’ when you
want to save changes in the settings and
‘
letmein
‘ to edit the channellist. You are not
able to change the password on the Aminet A140.
For an easy configuration please do the following steps.
1. Connect the Aminet with power, LAN and a video cable to you TV, we recommend using
HDMI to have best quality.
2. You can use an USB keyboard or the special amino IR keyboard, to open the menu.
3. After the start of the amino A140, you should see the normal start page.
Figure 1: Start page of the amino
4. To get to the menu, please press the key combination Alt+M or CTRL+Alt+M on your
keyboard and enter the management password
‘
leaves
’
.
Figure 2: Login at the amino
5. After you have opened the menu you can go to the sub menus by using the arrow keys of your
keyboard.
The arrow keys ‘↑’, ‘↓’ and ‘→’ are for opening/navigating the sub menu and the arrow key ‘←’
is for leaving the sub menu.
