TSS8030R_R2.1 – October 2018
Page 4
Service schedule
It is done by authorized personnel and includes the following activities:
1. Inspection for visible physical damage
- monthly
2. Testing in real conditions
- monthly
3.* Preventive cleaning of the optic chamber
- every 6 months
*The fire detector is removed from the base. The body cover (fig.1,pos.6) is removed by rotating to
rest anticlockwise. The optic chamber cover (fig.1,pos.7) and the screen (fig.1,pos.8) are removed.
For the optic chamber cover and the screen it is permitted washing liquid to be used. Then they
should be rinsed out and dried. The optic chamber is dusted with a small brush.
The optic chamber is compulsory dusted when the fire detector enters Contaminated chamber
Mode. If it is not cleaned in due time it will get contaminated to such an extent that it would not
allow the proper functioning of the fire detector which will be signaled as Fire Condition.
Warranty
FD8030 and 8000R are manufactured by Unipos Ltd.
The manufacturer guarantees the normal operation of the fire detector providing that the
requirements set herein have been observed. The manufacturer does not bear warranty liabilities
for damages caused through accidental mechanical damage, misuse, adaptation or modification
after production. The manufacturer bears warranty liabilities for damages in the fire detector
caused through manufacturer's fault only.
