Teracom TCW122B-CM, Руководство пользователя

Страница: 18 / 20

TCW122B-CM_R4.5 – March 2019 Page 17
15. Environment information
This equipment is intended for use in a Pollution Degree 2 environment, at altitudes up to 2000
meters. When the controller is a part of a system, the other elements of the system shall comply
with the EMC requirements and shall be intended for use in the same ambient conditions.
16. Safety
This device must not be used for medical, life-saving purposes or for any purpose where its failure
could cause serious injury or the loss of life.
To reduce the risk of fire, only flexible stranded wire, with cross section 0.5mm² or larger for wiring
of digital and analog inputs and relay output of the device should be used.
To avoid electric shock and fire hazard, do not expose this product to liquids, rain, or moisture.
Objects filled with liquids, such as vases, should not be placed on this device.
There is a risk of overheating (damage) of the controller if recommended free spaces to adjacent
devices are not ensured. A joint part with external component shall have space for
attachment/removal of the cable after installation.
Teracom does not guarantee successful operation of the product if the product was used under
conditions deviating from the product specifications.
To ensure that the device works correctly follow the steps below:
• ensure that the device is installed correctly, refer this user manual;
• log into the devices via browser program;
• make proper setup;
• set up the digital inputs to work in “dry contact” mode;
•
short the “Din1” and “GND”;
•
install sensor TSH1XX or TST1XX on the 1-Wire bus;
•
go to “Monitoring page” of WEB interface – proper parameters value should be
displayed at the same time flashing “STS” led should indicate the proper operation.
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
In no event will Teracom Ltd. be responsible or liable for indirect or consequential damages
resulting from the use or application of this equipment.
17. Maintenance
Upon completion of any service or repairs to the device or once per year, safety check must be
performed to determine that this product is in proper operating condition. Clean the device only
with dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static
cleaning device (dust remover) or any kind of abrasive materials to clean the device.