TCG140-4_R1.0 - February, 2021
Page 7
11. Environment information
This equipment is intended for use in a Pollution Degree 2 environment, at altitudes up to
2000 meters. When the module is a part of a system, the other elements of the system shall comply
with the EMC requirements and shall be intended for use in the same ambient conditions.
12. Safety
This device must not be used for medical, lifesaving purposes, or for any purpose where its
failure could cause serious injury or the loss of life.
To reduce the risk of fire, only flexible stranded wire, with cross-section 0.5mm² or larger for
wiring of digital and analog inputs and relay output of the device should be used.
To avoid electric shock and fire hazard, do not expose this product to liquids, rain, or moisture.
Objects filled with liquids, such as vases, should not be placed on this device
.
There is a risk of overheating (damage) of the module, if recommended free spaces to
adjacent devices are not ensured. The joint part with the external component shall have space for
attachment/removal of the cable after installation.
Teracom does not guarantee the successful operation of the product if the product was used under
conditions deviating from the product specifications
.
To ensure that the device works correctly follow the steps below:
• ensure that the device is installed correctly, refer to this document;
• log into the devices via browser program;
• make proper setup;
• set up the digital inputs to work in “dry contact” mode;
• short the “Din1” and “GND”;
• install sensor TSH2XX or TST1XX on the 1-Wire bus;
• go to “Monitoring page” of WEB interface – proper parameters value should be
displayed;
• go to “Setup-> SMS/Mail” menu and set the Master number. After saving the number,
press “send test SMS” button. The master should receive a confirmation SMS message.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired. In no event will Teracom Ltd. be responsible or liable
for indirect or consequential damages resulting from the use or application of this equipment.
13. Maintenance
Upon completion of any service or repairs to the device or once per year, a safety check must
be performed to determine that this product is in proper operating condition. Clean the device only
with a dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static
cleaning device (dust remover) or any kind of abrasive material to clean the device.
14. Package content
The product package includes:
• TCG140-4;
• Multi-band antenna - 698 to 960 and 1710 to 2690MHz;
• Four spacers/bumpers;
• RS-485 terminator;
• Quick start guide.
