GB
E
ng
lish
Instruction Manual
Multi Synergic 250 - Multi Synergic 380 - Multi Synergic 500 and Accessories
To modify the second level parameters, select
with the forth push button.Once selected, use
the second knob to adjust. The little display,
shows the correction value in % That can in-
crease or decrease up to 100% the current
synergic value.
With the second knob, the arc length can e
adapted to the welding, The adjustment of the
arc length is +/- 20 and a symbol of the arc
length light on during the regulation
26. PULS MIG SYNERGIC
To select the double pulse, push the forth push button
up to the icon FREQUENCY light on and Adjust the
double frequency level with the second knob.
SELECT PULS MIG- MODE:
There are only five puls program in Multi Syn-
ergic Starting from synergic program, push the
first push button, if the program exist, the puls
icon light on.
SELECT PULS MIG- MODE:
If the program in MIG is not included in one of the Table, the
choose of pulse mig cannot be completed.
Adjust the welding current , in the little display The
value of the suggested thickness of the welding
material is proposed.
1
2
3
4
6
5
Page. 17
Multi Synergic 280 Multi Synergic 350 Multi Synergic 500
