10
ConneCtIng poWer SUpply
1. Put the connector of the power cord into the
aC In
(AC inlet) of the projector.
2. Firmly plug the power cord into the outlet. After a
few seconds, the
poWer
indicator will light steady
orange.
Please remember that when the DIRECT POWER ON
function is activated, the connection of the power
supply will turn on the projector.
WARNING
n
Please use extra caution when connecting the power cord, as incorrect or faulty connections may
result in fire and/or electrical shock.
n
Only use the power cord that came with the projector. If it is damaged, consult Teq to get a new
one.
n
Only plug the power cord into an outlet that matches the voltage of the power cord. The power
outlet should be close to the projector and easily accessible. Remove the power cord for
complete separation.
n
Never modify the power cord.
