Instruction manual for Laser Profiling System-PDA - version of April 2018
Page 5 / 14
II - SHOW THE TABLE OF DRILLING
III - MANUALLY MODIFY OF THE PROFILE
•
To modify the position of a point :
1. click on the menu « Profiler
⇒
Edition mode » ;
2. press and hold a point on the curve ;
3. move it on the screen.
To show the table press the
5
button.
•
On this screen you can change a value by
clicking it and pressing buttons
1
or
2
to
increase or decrease the values ;
•
By pressing the button
5
it is possible to
visually modify the characteristics of the
borehole with the same buttons ;
•
To enter a value, click on « Profileur
⇒
Hole
property »
3
1 5 2
4