Tentsile Flite Tree Tent, Руководство пользователя

Страница: 5 / 20

Positioning the Flite Positioning the Flite
Tentsile Tree Tents need 3 secure and strong anchor points to suspend Tentsile Tree Tents need 3 secure and strong anchor points to suspend
from. The distances are marked below. Once the location is found, lay from. The distances are marked below. Once the location is found, lay
out the Flite on the ground with the corners facing your selected trees. out the Flite on the ground with the corners facing your selected trees.
Protective tree wraps are provided should you wish to use them, wrap Protective tree wraps are provided should you wish to use them, wrap
around trunk before attaching the tree straps. around trunk before attaching the tree straps.
Flite+ Body Flite+ Body
Flite+ Rainfly Flite+ Rainfly
x2 Pole sets x2 Pole sets
Long and Short Long and Short
x1 Ratchet x1 Ratchet
x3 Straps x3 Straps
x3 Screw Pegs x3 Screw Pegs
Flite Flite
Minimum setup distances: Minimum setup distances:
4 x 4 x 3m / 10 x 10 x 13ft 4 x 4 x 3m / 10 x 10 x 13ft
Maximum setup distances:
9 x 9 x 10m / 29 x 29 x 32ft
Anchor point should Anchor point should
be less than 90 degrees be less than 90 degrees
from each other. from each other.
Tree Tree
Tree Tree
Tree
Tree Tree Tree Tree
Tree Tree
07 08
Sight-Line-Tag Sight-Line-Tag
Use the Sight-Line-Tags on the side of the Flite. Use the Sight-Line-Tags on the side of the Flite.
Look along the tag and ensure it and the strap Look along the tag and ensure it and the strap
are inline with the tree. There is a tolerance of up are inline with the tree. There is a tolerance of up
to 5-7 degrees, but if Sight-Line-Tags are ignored to 5-7 degrees, but if Sight-Line-Tags are ignored
you are likely to break your unit. you are likely to break your unit.
SIGHT-LINE-TAGS