4
OPERATION
DIALLING A SPEED DIAL NUMBER
1.
Lift up the handset or Press the
key to make the call on headset.
2.
Wait for dial tone.
3.
Press one of memory keys ( M1, M2 or M3 ).
4.
The number stored in that specific memory key will be dialled out
automatically.
SWITCHING TO TONE OR PULSE DIALING
1.
Use the switch at the bottom of the phone to set the phone to Tone
( T )
or
Pulse
( P )
dialing.
2.
If the phone is connected to a Pulse exchange you can temporarily switch to
Tone
( T )
transmission by pressing the
key ( ie.. after you have connected
to an electronic banking facility ).
SPEAKER VOLUME ADJUST
The loudness of the speaker can be adjusted by sliding the
Speaker Volume
Control (
)
switch on the right-hand side bottom part of the phone.
【
Note
】
If there is a headset connected , this switch will automatically
change to “ headset receiver ” volume control.
RINGER VOLUME CONTROL
The loudness of the ringer can be adjusted by sliding the
Ringer Volume Control
( )
switch on the middle right-hand side of the phone.
Содержание K-311
Страница 3: ...3 DIAGRAM Front View Bottom View Side View INSTALLATION ...
Страница 4: ......
