Cancel
CT Test
Confirm
CT Connection
Current
380.0
380.0
380.0
CT Test was Started
Current Transformer Test
L1
L2
L3
A
A
A
How is the
C
urrent
T
ransformer
T
est
D
one ?
How is the
S
tep
M
easurement
D
one?
20
-01.50
-01.50
-01.50
Step Measurement
Step Test was Started
1. Step (kVAr)
L1
L2
L3
CANCEL
OK
-01.50
-01.50
-01.50
Step Measurement
Step test was Started
1. Step (kVAr)
L1
L2
L3
CANCEL
OK
In order to reach current transformer test page, enter
these menus subsequently;
After reaching the current transformer page, when the
''Start Current Transformer Test'' button is pressed,
the test
starts automatically. If any kind of error happens in the
connections, the device gives warning and does not accept
the connection. After canceling the test, you can start current
transformer test, just after correcting the connection error
according to the warnings.
If there is no error in the connections, the device starts step
measurement automatically after the current transformer
test is confirmed. After the device measured all steps, when
the ''confirm'' button is pressed all of the measured steps are recorded and the device
starts intervention.
In order to reach step measurement
(automatic
measurement)
page,
enter these menus subsequently;
In order to choose the steps which is to be measured in the
automatic measurement page; press the button of the step.
When the button is pressed;
logo of the step is changed.
After choosing the steps, when the ''Start'' button is pressed;
automatic measurement starts.
When the step measurement starts, step measurement
page comes to the screen. The page shows which
measurement of the step is done and the value that is
measured at each phase. If the c
apacitor
is connected,
(-) sign appears on the left. If the shunt reactor is connected,
there is no sign of the value. After the measurement of the
step is completed, subsequent step measurement starts if there is chosen steps.
When the
measurements completed ''step test is completed'' sign comes to the screen . Press the
''confirm'' button in order to record values. When you press the ''confirm'' button ;
''step measurement is confirmed'' sign comes to the screen and turns to the main page and
the device start to
interfere.
OK
Select the Steps to Be Measured!
1
14
13
12
7
6
5
18
11
4
17
10
3
16
9
2
8
15
TCR
All
Pass.
All
Active
TURN BACK
Settings
E
Current Transformer
E
Settings
E
Step Settings
E
Auto Measurement
E
Start CT Test
E
When the "Cancel" button is pressed, it will cancel and returns to the
"Auto
matic
measurement" screen without saving the step measurements.
If you press the ''return'' button,
main page of the step comes to the screen without doing
any operation.
