2
Dimensions:
Connection:
N
L1
L2L3
2A
Load1
Load2
ERD-48
3
4
5
6
7
8
9
100..240 VAC50/60Hz 6VA
100..240 VAC50/60Hz 3mA
no
Out1
nc
Out2
START
48mm
m
15mm
75mm
6mm
Страница 1: ...RT ON or flashing 11 12 pins 100 240VAC 50 60Hz max 3mA 99 9 sec 999 sec 99 9 min veya 999 min selectable 0 1 sec 1 sec 0 1 min 1 min 1 5 of SET Value Out1 Relay NO O NC 250VAC 2A Resistive load Out2 Relay NO O 250VAC 2A Resistive load 100 240VAC 50 60Hz 5VA o o 20 C 55 C 2000m Technical Specification Use twisted pair and shielded signal cables Connect shield to ground from the device side Keep al...
Страница 2: ...2 Dimensions Connection N L1 L2 L3 2A Load1 2A Load2 ERD 48 3 4 5 6 7 8 9 100 240 VAC 50 60Hz 6VA 100 240 VAC 50 60Hz 3mA no Out1 nc Out2 N START 48mm 48mm 15mm 75mm 6mm ...
Страница 3: ...ne of the buttons Up or Down Enter SET St A Value Wait for 2 sec Enter St b Value Wait for 2 sec New SET Value Entered Read Set code and SET Value in a cylic manner Enter new SET Value by using up and or down buttons Wait for 2 seconds without pressing any button New SET Value is entered automatically New SET Value is valid with the next Power ON If out dly on delay only SET value appears If out F...
Страница 4: ... at the same time during Power ON Select Mode of Operation Wait for 5 sec Select Time Base Wait for 5 sec New mode of operation and time base selected out dLY ON DELAY out FLS Flashing Read and selected max scale value Wait for 5 seconds without pressing any button New max scale selection is saved to EEPROM 99 9 sec 999 sec 99 9 min 999 min out dLY out FLS ...
