REPLACEMENT PARTS
Ref. No. 8
Ref. No. 9
Ref. No. 5
Ref. No. 7
Ref. No. 6
REF. NO.
DESCRIPTION
1
Shelf
1
302
2
Partition
Shelf
4 305
3
Left Door: Solid Door for 7220
1
944LD
Left Door: C-Thru for CVD7220 (not shown above)
1
CVD-72LD
4
Right Door: Solid Door for 7220
1
944RD
Right Door: C-Thru for CVD7220 (not shown above)
1
CVD-72RD
5
Locking Bar Set
1
944LB
6
Locking Handle w/keys & hardware
1
944LH
7
Locking Cam*
1
944LC
8
Cotter Pin*
1
CTRPN
9
Locking Bar Guide Insert (Nylon)*
2
944GI
10
Hinge
Pins*
6 944HP
11
Partition 1 045CR
12
Coat Rod Bracket
2
045RB
13
Coat Rod
1
046CR
*Included in Ref. No. 5, locking handle with keys and hardware (Part No. 944LH). May be ordered alone or as part of the full hardware set.
QTY. PART NO.
1.
To move the shelf, using your
hands apply pressure to the
underside of the shelf and
tap it off the tabs.
2.
Place the shelves at the
desired level. Insert the shelf
edges into the tabs at the
new location. Be sure that
the shelf is securely fitted
into the tabs at all points of
contact.
3.
The cabinet must be level in
order for the doors to close
properly. Levelers may be
adjusted by placing the
7
/
32
”
hex head driver through the
hole in each end of the sill
and adjusting the leveling
screw.
Insert hex head driver
through hole (above) to
adjust leveler (below).
Ref.
No. 1
Ref.
No. 3
Ref.
No. 4
Ref.
No. 10
Ref.
No.13
Ref.
No. 12
Ref.
No. 11
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
49B204
