ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1620897
MOBILE MAINTENANCE BENCH
Model MB-2-2542
Tennsco Corp., Dickson, TN 37056-1888 * (615) 446-8000
Be Sure To Save This Instruction Sheet For Future Reference!
GENERAL SAFETY INFORMATION
1. Do not tow workbench.
2. When bench is in stationary position, lock brakes on
casters.
CAUTION: BRAKES ON CASTERS ARE NOT
INTENDED TO SERVE AS FLOOR LOCKS OR TO
RESTRICT MOVEMENT ON INCLINE SURFACES.
3. Do not move bench into areas or over surfaces where
footing of operator and balance of bench are hazardous.
4. This is an all metal bench—do not use around hazardous
electrical conditions.
5. Do not overload bench.
6. Do not lift bench from floor by use of chains, cables or
similar devices.
7. Periodically check for loose bolts and nuts that retain
casters.
8. When moving bench,
push
from side.
DO NOT PULL!
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of
shipment, hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper
application, modification or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on
the goods have been defaced, modified or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY EXCLUDED.
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE
GOODS AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL,
CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective
at Buyers place of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering
returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the
warranty period stated above.
TENNSCO CORP.
P.O. Box 1888
Dickson, TN 37056-1888
Voice: (800) 251-8184
Fax: (800) 722-0134
Web: www.tennsco.com
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However,
should your unit contain missing or damaged parts, replacements may be obtained directly from Tennsco. To
obtain proper replacement parts, follow the instructions below:
DESCRIPTION
Tennsco mobile maintenance benches are designed for use
as a mobile workstation and to transport tools or heavy parts
to the job site. Units are all welded construction of heavy
gauge steel and shipped fully assembled, except for casters.
By not mounting casters, units may be made completely
stationary.
Hardboard laminated to steel top provides a smooth
worksurface, and 1-1/2" high side and back guards prevent
items from rolling off of the workbench.
Model MB-2-2542 comes with a single drawer on the left
side and a door with chrome locking handle on the right side.
Both sides of this unit have a shelf which can be adjusted to
seven levels on three-inch increments. A key lock for the
drawer (Part No. CL-1) is available seperately.
All drawers have built-in recessed handles and are on nylon
rollers for smooth operation. Each drawer is equipped with
an adjustable divider with card holder.
SPECIFICATIONS
Overall Dimensions:
Cabinet size (with casters)...........36"w x 24"d x 36-
1
4
"h
Cabinet size (without casters)....... 36"w x 24"d x 31
1
8
"h
Top size .......................................................42"w x 25"d
Basic Construction
Cabinet.................................................... 20 gauge steel
Lower cabinet frame ............................... 16 gauge steel
Top and supports .................................... 16 gauge steel
Caster supports....................................... 16 gauge steel
Drawer ........................................ 22 and 24 gauge steel
Track and rail .......................................... 18 gauge steel
Door with pan stiffener ............................ 20 gauge steel
Shelf........................................................ 20 gauge steel
Work surface....................
1
8
" thick tempered hardboard
Shelf adjustment increments........................................2"
Casters:
Diameter .....................................5" x 1
1
4
" (hard rubber)
Style ................................2 rigid and 2 swivel with brake
Weight .................................................................... 155 lbs.
To obtain the proper replacement parts, please fill out the following information:
Contact name: ___________________________________ Company Name: ________________________
Shipping Address: _________________________________________________________________________
City: ____________________________________________ State: ____________ ZIP: ______________
Telephone Number: _______________________________ Fax Number: ___________________________
Item Purchased: __________________________________ Purchase Date: _____ Color: _____________
Please supply names or numbers from the "INSPECTED BY" tag included with the product: _______________
Part(s) Needed (description & model #): ________________________________________________________
Who was this product purchased from? ________________________________________________________
Reason for Return (freight damage, defective, etc.): ______________________________________________
Comments: ______________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Fax or mail this form to: Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Voice: (800) 251-8184 Fax: (800) 722-0134
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.