ASSEMBLY OF OPEN ESP SHELVING
Two people are recommended for assembly. Approximate assembly time: 10-15 minutes.
2.
Lay the two corner posts (Ref. No. 1) parallel on the floor or
on saw horses with the short sides facing up.
1.
The reference numbers used throughout this sheet refer
to the illustration on the back cover. This is to help you
to identify the various parts as they are mentioned.
3.
Create an upright assembly by bolting a side sway plate (Ref.
No. 3) 10 holes down from the top of both corner posts,
connecting them together. Then bolt another side sway plate
ten holes up from the bottom on both corner posts.
5.
Lean one upright assembly against a wall
or another stable surface and place a
shelf (Ref. No. 2) on the bottom clips
of the post.
4.
Place the upright assembly to the side and repeat the first two
steps on the remaining corner posts, creating a second upright
assembly. Place shelf clips (Ref. No. 7) in the top and bottom
holes of all four posts.
Bolt in the tenth hole
from the bottom.
Shelf Clip
Shelf Clip