Tennsco BK6-121812-1 Скачать руководство пользователя страница 2

ASSEMBLY OF THREE WIDE BOX LOCKERS

Tools Needed:

 A provided 

11

/

32

” nut driver (

11

/

32

” socket may be substituted).  

Two people are recommended for assembly. Approximate assembly time: 40-50 minutes.

5.

 

Next bolt the right side (Ref. No. 6) to the back so that the  

 

side flange fits around the back. Also attach to the top,    

 

bottom and shelves. Use twenty three bolts and nuts (for a  

 

unit without legs) to complete this step.

2.

 

Unpack all the parts then locate the left and right hand sides  

 

and separate them. The top of the sides and back can be  

 

determined by the three holes closest to the end of the part.  

1.

 

The reference numbers used throughout this sheet refer to the  

 

illustration on the back cover. This is to help you to identify the  

 

various parts as they are mentioned.

3.

 

Place back (Ref. No. 1) on a protected flat surface so that the  

 

flanges face upward. Keep all parts level and square during 

 

 

assembly. Make sure all the parts are aligned properly before  

 

tightening the bolts and nuts (Ref. No. 13). Bolt the left side   

 

(Ref. No. 2) to the back so that the side flange fits around the  

 

back using seven nuts and bolts (nuts to the inside); use nine  

 

bolts and nuts if the locker does not have legs.

6.

 

If the locker has legs, insert the leg into the corner between  

 

the bottom and the side. Bolt the leg to the side using two  

 

bolts and nuts per leg.

If leg version, do not 

bolt through bottom 

two holes yet.

Top portion

4.

 

Bolt the shelves (Ref. No. 4), top and bottom (Ref. No. 5) to the  

 

back and left side panel using four nuts and bolts each. Next  

 

bolt an intermediate side and back panel to the flange on the  

 

back of the first locker in seven places (nine if no legs). Next   

 

attach a top, bottom, and shelves to the first intermediate side  

 

and back. These will share bolts with the parts on either side of  

 

them as shown in detail view. Next attach remaining  

 

intermediate side and back to the flange of the second back. 

 

 

Attach the remaining top, bottom, and shelves to the  

 

intermediate side.



Intermediate Side

Left Side

Top

Bottom

Shelf

Right Side



Отзывы: