REPLACEMENT PARTS
REF. NO.
DESCRIPTION
1
Shelf
1
301
2
Left Door
1
978LD
3
Right
Door
1 978RD
4
Locking Handle with Keys
1
944LH
5
Locking
Cam*
1 944LC
6
Cotter Pin*
1
CTRPN
7
Locking Bar Set
1
978LB
8
Lock Bar Guide Inserts*
2
944GI
9
Hinge Pin (not shown above)
1
944HP
1.
To move the shelf, using your hands apply pressure to the underside of the shelf and tap it off the tabs.
2.
Place the shelf at the desired level. Insert the shelf edges into the tabs at the new location. Be sure that the shelf is securely fitted
into the tabs at all points of contact.
3.
The cabinet must be level in order for the doors to close properly. Levelers may be adjusted by placing the nut driver through the
hole in each end of the sill and adjusting the leveling screw.
Ref.
No. 1
Ref.
No. 2
Ref.
No. 3
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
Insert hex head driver
through hole (above) to
adjust leveler (below).
Ref.
No. 4
Ref.
No. 5
Ref.
No. 6
Ref.
No. 7
Ref.
No. 8
*Included in Ref. No. 4, locking handle with keys (Part No. 944LH). May be ordered alone or as part of the full hardware set.
QTY. PART NO.
49B253
