REPLACEMENT PARTS
Ref. No. 7
Ref. No. 7
Ref. No. 3
Ref. No. 5
Ref. No. 4
*Included in Ref. No. 4, locking handle with keys and hardware (Part No. 043LH). May be ordered alone or as part of the full hardware set.
1.
To move the shelf, using your
hands apply pressure to the
underside of the shelf and
tap it off the tabs.
2.
Place the shelf at the desired
level. Insert the shelf edges
into the tabs at the new
location. Be sure that the
shelf is securely fitted into the
tabs at all points of contact.
3.
The cabinet must be level
in order for the doors to
close properly. Levelers may
be adjusted by placing the
nut driver through the hole
in each end of the sill and
adjusting the leveling screw.
Insert hex head driver
through hole (above) to
adjust leveler (below).
Ref. No. 1
Ref.
No. 8
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
REF.
NO.
1 Full Shelf (all units)
301
302
301
302
301
302
2 Half Shelf (combination units only)
__
__
__
__
304 305
3 Locking Bar Set
043LB 043LB
043LB
043LB
043LB 043LB
4 Locking Handle w/keys & hardware
043LH 043LH 043LH
043LH 043LH 043LH
5 Locking Cam*
944LC 944LC 944LC
944LC 944LC 944LC
6 Locking Bar Guide Insert (Nylon)*
944GI 944GI 944GI
944GI 944GI 944GI
7 Cotter Pin*
CTRPN CTRPN CTRPN
CTRPN CTRPN CTRPN
8 Dummy Handle*
043DH 043DH 043DH
043DH 043DH 043DH
9 Coat Rod Bracket (not shown above)
__
__
045RB
045RB
045RB 045RB
10 Coat Rod (not show above)
__
__
045CR
045CR
046CR 046CR
7818
(18”d Cabinet)
DESCRIPTION
7824
(24”d Cabinet)
7818W
(18”d Cabinet)
7824W
(24”d Cabinet)
7814
(18”d Cabinet)
7820
(24”d Cabinet)
NOTE: A 7818 cabinet is shown above.
49B225