tennat NOBLES S6, Техническое и сервисное руководство

Страница: 10 / 57

PLDC04348
REVISION 00
November 09, 2020
TECHNICAL OFFICE
November 30, 2020
10
of
58
A1.3 Replacing the centre brush transmission belt
Disassembly
1
Move the machine onto flat and dry flooring.
2
Make sure that there is enough room around the machine to perform the dismantling operations safely.
3
If necessary, clean the working area with a jet of compressed air.
4
Remove the battery.
5
Access the belt as explained in the previous heading.
6
Remove the side brush motor and loosen the hex head screw to remove the bracket.
7
In order to release the belt, the motor pulley must be moved toward the pulley of the centre brush; accordingly,
loosen the two hex head screws and ease the motor toward the brush.
8
Remove the belt from the motor pulley, then proceed to unseat it from the pulley of the centre brush. Once the
belt is completely clear of the pulley groove, it can be removed.
Take care when removing and assembling the belt from/onto the pulley; use protective leather
work gloves.
G
Reassembly
1
To refit the belt, repeat the disassembly operations described above in reverse order.
7
6