Tennant sentinel, Руководство оператора

Страница: 67 / 150

67
Sentinel 9018513 (12-2018)
OPERATION
17. Point the high pressure washer wand in a safe
direction and squeeze the trigger to relieve
pressure from the system.
18. Disconnect the high pressure washer hose
from the high pressure washer receptacle and
disconnect the high pressure washer wand
from the high pressure washer hose.
19. Press and hold the hopper tilt back button until
the hopper is completely tilted back, allowing
access to the high pressure washer hose and
wand storage location.
20. Turn off the machine.
21. Engage the hopper support pin. See
ENGAGING THE HOPPER SUPPORT PIN.
22. Return the hose and wand to the storage
location.
23. Remove the hopper support pin from the
hopper leg. See DISENGAGING THE
HOPPER SUPPORT PIN.
24. Turn on the machine.
25. Press and hold the hopper tilt forward button
until the hopper is completely tilted forward.
VARIO SWEEPING BRUSH (OPTION)
The Vario Sweeping Brush allows side brush
sweeping on the left or right side of the machine.
The brush arm moves along the front of the
machine. The brush angle, movement, front and
side tilt, and direction of rotation are adjusted for
the right or left side.
VARIO SWEEPING BRUSH ON-OFF SWITCH
The
Vario Sweeping Brush on-off switch controls
the power of the sweeping brush and the direction
of brush rotation.
On (right sweep): Press the right side of the switch.
The brush will turn on and rotate counterclockwise.
On (left sweep): Press the left side of the switch.
The brush will turn on and rotate clockwise.
Off: Place the switch in the middle position. The
brush will turn off.
VARIO SWEEPING BRUSH RAISE-LOWER
SWITCH
The
Vario Sweeping Brush raise-lower switch
controls the height of the sweeping brush.
Lower brush: Press the left side of the switch. The
brush will lower to ground level in the free-
fl oating
position.
Raise brush: Press and hold the right side of the
switch. Release the switch when the brush is
raised to the desired height.