Tennant Orbio OS 3, Руководство оператора

Страница: 19 / 98

OPERATION EN
17
OS3 DM20036 (1 − 2018)
REPLACING THE e − CELL
Requires service kit AS20041 E − CELL
REPLACEMENT
Refer to the Wear Component Indicators panel on
the touch screen display for status of system wear
components. Order a replacement e − cell when
the remaining segment on the progress bar turns
yellow. Replace the e − cell when the the segment
turns red.
Order new e − cell
(yellow)
Replace e − cell
(red)
1. Disconnect power cord from outlet.
FOR SAFETY: When servicing machine
unplug cord from wall outlet.
2. Turn off water.
3.
Dispense either the MultiSurface or
MultiMicro solution into a bucket or a drain
to depressurize the system.
4. Remove front access panel using the access
key.
5. Disconnect ribbon cable.
6. Rotate retaining tab counter clockwise to
release the e − module. Loosen with a M7
wrench if needed.
7. With a firm grip pull out e − module from os3.
8. Flex tabs on manifold and separate from
e − cell. Dispose of old e − cell properly.