Tennant ATLV 4300, Руководство оператора

Страница: 56 / 102

OPERATION
ATLV 4300 330510 (9
−
99)
54
VACUUM HEAD (OPTION)
The Vacuum Head option allows the operator to
vacuum without having to manipulate the vacuum
hose. The vacuum hose easily attaches to the
vacuum head. The vacuum head has an
adjustable down stop which can be set so the
operator may return the vacuum head to normal
operating position after raising the head to let in
bulky debris or for climbing a curb.
Note: The vacuum head should be raised while
driving machine to and from area to be
vacuumed. Raise vacuum head when driving over
curbs and up and down ramps.
TO ADJUST VACUUM HEAD DOWN STOP:
1. Press the top of the vacuum head switch to
lower the vacuum head.
2. Adjust down stop height with vacuum head
adjustment knob.
Raise vacuum head adjustment: Turn the
knob counterclockwise.
Lower vacuum head adjustment: Turn the
knob clockwise.
Note: When adjusted properly, the rear skirt of the
vacuum head should be rolled out about 13mm
(.50 in) in the rear on a flat hard surface.
3. Press the bottom of the vacuum head switch
to raise the vacuum head. Vacuum head
height is now set for next use.