IB 9015087 (04- 2017)
2
5. Install the hydraulic pump (1) onto the pump
mounting bracket. (Fig. 1)
6. Connect the hoses from the hopper lift
cylinder to the hydraulic pump (1). (Fig. 1)
7. Connect the wire harness to the hydraulic
pump (1).
8. Fill the hydraulic pump (1) with hydraulic fluid
until the hydraulic fluid is at the correct level.
(Fig. 1)
9. Reconnect the battery cable to the machine.
10. Turn on the machine, raise and lower the
hopper several times, lower the hopper, and
turn off the machine. Check the hydraulic
pump / hydraulic hose connections for leaks.
11. Check the hydraulic level in the hydraulic
pump (1). Add hydraulic fluid as necessary
until the hydraulic fluid is at the correct level.
The hopper must be completely lowered
before checking hydraulic level / adding
hydraulic fluid.
1
FRONT
Hopper lift cylinder
Set M10 hex screws
(Qty. 2) / flat washers
(Qty. 2) aside
Pump mounting
bracket
Check hydraulic fluid level in hydraulic pump (1).
Hopper must be completely lowered before checking
hydraulic level / adding hydraulic fluid.
FIG. 1