OPERATION
35
7200 330040 (9--05)
9. Access the recovery tank drain hose by
loosening the retaining ring and then pulling
the hose out.
10. Remove the drain hose cap while holding
the hose up, then slowly lower the drain
hose to the floor drain.
11. Flush out the inside of the recovery tank with
clean water.
12. ES mode (option): Flush out the recovery
tank with clean water. Rinse the ES filter at
the bottom, and the sensor floats near the
top of the tank.
NOTE:
DO NOT
use steam to clean the tanks.
Excessive heat can damage the tanks and
components.
13. When heavy deposits of sand and debris
collect on the bottom of the tank, flush out
the recovery tank by placing a hose into the
side clean--out port.
WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s).
