Tennant 6650, Руководство оператора

Страница: 66 / 98

MAINTENANCE
6650 330910 (3--08)
64
ENGINE
COOLING SYSTEM
Check the coolant level in the reservoir daily. The
coolant level must be between the two indicator
marks when the engine is cold.
Check the radiator core exterior for debris every
100 hours of operation. Blow or rinse all dust,
which may have collected on the radiator, in
through the grille and radiator fins, opposite the
direction of normal air flow. The grille and
hydraulic cooler open for easier cleaning. Be
careful not to bend the cooling fins when cleaning.
Clean thoroughly to prevent the fins becoming
encrusted with dust. Clean the radiator and cooler
only after the radiator has cooled to avoid
cracking.
FOR SAFETY: When servicing machine,
wear eye and ear protection when using
pressurized air or water.
Check the radiator coolant level every 100 hours
of operation. Use clean water mixed with a
permanent-type, ethylene glycol antifreeze to a
--34
_
C (--30
_
F) rating.
FOR SAFETY: When servicing machine,
avoid contact with hot engine coolant.
The coolant system must be completely filled with
coolant to keep the engine from overheating.
When filling the radiator with coolant, use the
drain cock to ensure that all the air is out of the
system.
Check the radiator hoses and clamps every
200 hours of operation. Tighten the clamps if they
are loose. Replace the hoses and clamps if the
hoses are cracked, harden, or swollen.
Flush the radiator and the cooling system every
800 hours of operation, using a dependable
cleaning compound.