Tennant 6500 Скачать руководство пользователя

Страница: 43 / 112

OPERATION

6500 330270 (9--01)

OPERATOR SEAT

The operator seat is a fixed back style with a

forward-backward adjustment.

Adjust: Remove the seat mounting bolts, move

the seat to the position desired, and reinstall and

tighten the bolts.

Lift: Pull up on the seat mounting plate until the

seat mount locks up.

Lower: Pull on the release lever and lower the

seat mounting plate.

HEATER KNOB (OPTION)

The heater knob controls the cab heater on the

cab option.

On: Pull the knob out until the air temperature is

at the desired comfort level. For maximum heat,

pull the knob out all the way.

Off: Push the knob in all the way.

AIR CONDITIONING SWITCH (OPTION)

The air conditioning switch operates the cab’s air

conditioning in the optional cab.

On: Press the top of the switch.

Off: Press the bottom of the switch.

07798

08052

08131

Содержание 6500

















































































































Результаты поиска

Содержание 6500

Отзывы:

Похожие инструкции для 6500

Бренды по названию

Популярные бренды

Tennant 6500, Руководство оператора

Результаты поиска

Содержание 6500

Отзывы:

Похожие инструкции для 6500

Бренды по названию

Популярные бренды