Tennant 5700 Скачать руководство пользователя страница 69

Страница: 69 / 230

MAINTENANCE

5700 MM400 (3--97)

ADJUSTING THE SQUEEGEE GUIDE

ROLLERS

At each end of the squeegee are guide rollers to

guide the squeegee blade end along a wall.

Loosen the nut at the top of the guide roller and

move the roller in or out to adjust how close the

end of the squeegee blade comes to the wall. The

squeegee blade end should be further away from

the wall when the floor curves up into the wall.

SQUEEGEE BLADES

The squeegee has two squeegee blades, the front

and back. Each blade has four wiping edges. To

use them all, start with one wiping edge. To use

the next wiping edge, rotate the blade

end-for-end. To use the next wiping edge, rotate

the top edges down, bottom edges up. To use the

last edge, rotate the blade end-for-end.

Replace any worn or damaged squeegee blades.

REPLACING OR ROTATING THE REAR

SQUEEGEE BLADE

1. Make sure the squeegee is raised off the

floor.

2. Turn the machine power off and set the

parking brake if your machine has this

option.

FOR SAFETY: Before leaving or

servicing machine, stop on level

surface, and turn off machine.

3. Loosen the two retention knobs, one at each

end on the squeegee.

Содержание 5700







































































































































































































































Результаты поиска

Содержание 5700

Отзывы:

Бренды по названию

Популярные бренды

Tennant 5700, Руководство оператора

Результаты поиска

Содержание 5700

Отзывы:

Бренды по названию

Популярные бренды