Tennant 275 Series II, Руководство оператора

Страница: 4 / 132

ABOUT THIS MANUAL
275 SERIES II MM190 (12---89)
b
The smaller line of sweeper and scrubbers have less
complicated part section arrangement, and are
easier to find your way through the parts sections.
The larger machines can have quite a variety of
model types which significantly increases the size to
the machine manual. Because of this, on the larger
machine we made the first part section, Section 5, a
part section which contains parts common to all type
of the machine. If the machine has an engine, this
section contains parts information on a gasoline
powered machine.
The remaining sections contain only parts
information which is unique to that particular
machine type, such as unique diesel parts on the
machine, or unique SRS
r
parts. Knowing the
machine model type you have is important when
searching for that part information you need for
ordering repair parts. Start in that unique section first
when looking for a part, then go to the first parts
section, Section 5, if the part can’t be found in the
unique section.
MACHINE SERIAL NUMBERS
When a design change takes place to a machine,
the changes are indicated in the parts sections with
machine serial numbers. Know the serial number of
your machine which can be found on the machine
data plate mounted on the machine. Record this
number on the inside front cover of your manual
along with your customer number.
Machine number usage is recorded in the Machine
Serial Number
column of the parts lists in the parts
sections of the manual. If the machine serial number
column lists zeros on the left side of the dash, then
this part is used on all machines; such as (000000---
).
If the column lists zeros on the left of the dash and a
number on the right of the dash, then the part is
used on machines up to and including that machine
serial number; such as (00000---002345).
For parts that are used on machines beginning at
and continuing on from a certain serial number, the
column would list a serial number on the left of the
dash and have blank spaces on the right side of the
dash; such as (002346--- ). This part would be
used on machines starting with that machine serial
number and greater.
Finally, parts can be used on machines with serial
numbers in a certain block of numbers. In this
situation there is a serial number on the left and right
side of the dash. The part is then used on a machine
with a serial number starting at the number on the
left and up to and including the number on the right;
such as (002346---008900).
PARTS ASSEMBLIES
A part assembly has parts within the assembly, such
as a parking brake consisting of other smaller parts.
What parts are contained in a part assembly can be
determined by an indentation arrangement in the
description column of the parts lists.
Here is an example of a part assembly, in this case
we will use the parking brake mentioned previously:
Machine
Serial Number
Description Qty.
(000000--- ) Parking Brake 1
(000000--- ) Pin, Roll 1
(000000--- ) Link 1
(000000--- ) Spring, Compression 1
(000000--- ) Pin, Roll 1
(000000--- ) Support 1
(000000--- ) Lever, Release 1
(000000--- ) Rod, Parking Brake 1
(000000--- ) Washer, 0.50” 3
In this example, the parts whose descriptions are
indented under the parking brake are all parts of the
parking brake. When you order the parking brake
you will receive all the parts listed under it. You also
can order any of the individual parts listed under the
parking brake if it is the only part you need.